Justice® “JC” Competitor™ Series Super-LED®



High performance, cost competitive Super-LED® lightbar with a wide range of options, designed for ease of operation, upgrade and serviceability.

FEATURES

Front, rear and all bar operation control
Optional Scan-Lock™ flash patterns
Pattern override feature
Alley lights
Take-downs or flashing takedowns
Optional Traffic Advisor with control head

SPECIFICATIONS

Twelve inches wide and only 2 1/4″ high (without mounting feet).
Three standard lengths 44″, 50″, 56″ plus a 62″ Wrecker Bar.
Black polycarbonate base on an extruded aluminum platform. Clear outer lens standard with a moisture resistant compression fit gasket. Color lenses available.
Standard CON3™ lighthead modules with removable optic spreading filters.
Center section available with single CON3 or two LTR3s™ (for split color center section).
Corner modules available with 6 or 9 Super-LEDs®.
Standard passenger side cable, driver side optional.
Service oriented. Change colors, upgrade or service lightbar in the field.
Simply remove four screws to access any section of the lightbar.
Replace any lighthead by removing one screw and single connector.
Wrecker Lightbar, standard 62″ Competitor Series model with rear work and brake/tail turn lights.

Liberty SB WeCan®Single Color Series Super-LED®



WeCan Programmable Series includes an external interface unit, the WeCan® electronic control module (ECM), which communicates all lightbar operating functions via a 2 conductor, 20 gauge cable. All functions are programmed by a PC via simple “pick & click, or drag” screens. Windows® based 2000, XP or later operating system required. USB input to the ECM from PC or laptop makes programming easy.

FEATURES

Complete independent “On” or “Off” control of each lighthead.
Flash pattern control of each lighthead.
Phase control of each lighthead, with four phases that allow for alternating, simultaneous & combo flash patterns.
DUO™ lightheads offer independent control of each color in each lighthead, including On/Off and phasing.
Cruise light control with almost unlimited adjustable intensity levels.
Independent Hi/Low control is available to any one or more Super-LED lightheads, excluding the four corner modules (required for SAE certification).
Independent sequential (single wire or 2-wire) control of thetraffic arrow functions (left, right, split) does not require a Traffic Advisor control head.
The WCC9 (substituted for the ECM) has 10 pre-programmed lightbar configurations accessible via dip switches located on the rear of the unit.

Inner Edge® Undercover Lighting Systems


Full featured interior vehicle specifi c lightbar series is virtually undetectable when not in operation, allowing you to be seen only when you want to be seen! Now offered in the extra low profi le XLP Series! Low profile and extra low profile vehicle lighting systems with incredibly bright Super-LED® lightheads mounted in a rugged housing. This system fits snugly against the front or back window of select police vehicles.

All Inner Edges have these common features:

• Full featured interior lightbar that is virtually undetectable when not in operation.
• Designed to blend with vehicles existing interior.
• Easy installation. Front facing models mount to visor anchor points and rear lower facing models use the existing child-restraint brackets.
• Super-LED lights are low current, vibration and moisture resistant for reliable long life operation.
• Scan-Lock™ provides selectable multiple flash patterns.
• Requires customer supplied switches or control head, purchased separately.
• Super-LED take-down lights are available on front facing lightbars.
• Order by choosing the desired housing model, and then add LED lighthead colors.
• Available in four safety colors.
• Five-year warranty on LEDs.
• Includes vehicle specific mounting hardware, for the ideal fit.

NEW XLP Inner Edges have these additional features:

• Extra low profile (only 3/4” high) and brighter light output.
• Mounts higher and closer to the windshield, increasing headroom and providing a better field of view for the operator.
• XLP model specific lightbars virtually eliminate flashback to the operator.
• Includes removable lens for a spot pattern.
• Sturdy powder-coated aluminum housing.

Inner Edge® Rear Facing Lower Linear-LED® Series



Six or eight 6-LED or LINZ6™ Linear-LED® modules for warning or Traffic Advisor™ applications.These models mount on the lower rear deck against the rear window.

FEATURES

Six or eight 6-LED or LINZ Linear-LED® modules for warning or Traffic Advisor™ applications.
Choose fromsix configurations: Ten lamp programmable for warning light or eight lamp Traffic Advisor. Ten lamps with six lamp Traffic Advisor with two flashers on each end. Ten lamps with eight lamp Traffic Advisor with a single flasher on each end. Eight lamp programmable for waring light or Traffic Advisor. Eight lamp unit with six lamp Traffic Advisor with a single flasher on either end. Six lamp programmable for warning light or Traffic Advisor operation.
Low profile black textured housing mounts using existing child-restraint brackets.

Traffic Advisor™, Arrow Head Style



(Non Diagnostic) Halogen & LED Models

FEATURES

• These arrows give bright, clear, direct information.• Alert approaching traffic to hazardous vehicle situations and indicate correct direction with bright signal sequencing.• All the features of straight style Traffic Advisors in a larger size plus large left and right arrows.• Meets MUTCD2000 specifications*.• LED or halogen or strobe with 16 lamps.• Four operating modes (left, right, split and flash).• Eight programmable flash patterns.• Rugged extruded black powder painted aluminum housings.• One piece or split models available.• Removeable arrow heads for ease of storage and shipping.• Six 3/8″ slide bolts allow easy mounting on vertical surfaces or to user supplied brackets.• TACTRL3A control head is standard for 16 lamp arrays.• Two piece arrows have 10’ of interconnect cable between light arrays.• Twenty five foot, 16 conductor cable supplied with arrow.• Halogen and Strobe version available in 5’, 6’, 7’ or 8’ lengths.• Unique moving flash patterns assure quicker recognition at greater distances.* When mounted on appropriate backboard

SPECIFICATIONS

TA1652H • VOLTAGE (VDC) – 12.8 • TOTAL CURRENT DRAW (amps) – 1.5 ea hal. • DESCRIPTION – 16 lamp, halogen, arrow style, 500 series lightheads • DIMENSIONS IN INCHES (H x W x L) – 23-1/4 x 5-1/4 x 48 TA8852H • VOLTAGE (VDC) – 12.8 • TOTAL CURRENT DRAW (amps) – 1.5 ea hal. • DESCRIPTION – 16 lamp, halogen, arrow style, 500 series lightheads • DIMENSIONS IN INCHES (H x W x L) – 23-1/4 x 5-1/4 x 27-1/4 (each) TA1252L • VOLTAGE (VDC) – 12.8 • TOTAL CURRENT DRAW (amps) – .2 ea. LED lamp • DESCRIPTION – 12 lamp, LED, arrow style, 500 series lightheads • DIMENSIONS IN INCHES (H x W x L) – 16 x 5-1/4 x 48 TA1652L • VOLTAGE (VDC) – 12.8 • TOTAL CURRENT DRAW (amps) – .2 ea. LED lamp • DESCRIPTION – 16 lamp, LED, arrow style, 500 series lightheads • DIMENSIONS IN INCHES (H x W x L) – 23-1/4 x 5-1/4 x 48 TA1664H • VOLTAGE (VDC) – 12.8 • TOTAL CURRENT DRAW (amps) – 1.5 ea hal. • DESCRIPTION – 16 lamp, halogen, arrow style, 600 series lightheads • DIMENSIONS IN INCHES (H x W x L) – 36-1/2 x 4 x 5’/6’/7’/8’ TA8864H • VOLTAGE (VDC) – 12.8 • TOTAL CURRENT DRAW (amps) – 1.5 ea hal. • DESCRIPTION – 16 lamp, halogen, arrow style-two piece, 600 series lightheads • DIMENSIONS IN INCHES (H x W x L) – 36-1/2 x 4 x 33-1/4 (each) TA1664L! • TOTAL CURRENT DRAW (amps) – 1.2 ea. LED lamp • DESCRIPTION – 16 lamp, LED, arrow style, 500 series lightheads • DIMENSIONS IN INCHES (H x W x L) – 36-1/2 x 4 x 5’/6’/7’/8’

Responder® HD™ Series



Rugged aluminum base plate, 135 RPM and three year warranted motor assembly for reliable long-life performance. Two rotators, diamond mirror, magnetic or permanent mount. Options include color filter kit and coiled cord with in-line switch available.

FEATURES:

• Two rotator, with a rugged aluminum base plate for shock and vibration for reliable long-life operation.
• Redesigned 135 RPM motor assembly.
• Rugged construction for heavy duty applications.
• Permanent and magnetic mount available.
• Optional suction cup mount, color filter kit.

Mini Edge® Ultra Freedom Series



A new all Linear-LED™ (patent pending) lightbar featuring the next generation of ultra bight, ultra wide-angle LED technology, in a warning package that rivals strobe in impact, but provides heavy-duty, long life operation with low, low current draw. All Ultra lightbars have the same modular construction and are made for rough treatment and long hours of use.

FEATURES:

• Build your lightbar in any color combination
• Optional halogen alley lights
• Scanlock allows you to scan through multiple flash patterns and lock in the desired pattern
• Clear outer lenses are standard, with optional color lenses available

Mini Justice® JY Series


This is a compact, 22” version of the popular, full size Justice lightbar. Mini Justice is easy to operate, upgrade and service, and it’s ideal for applications where a full-size lightbar just won’t work!

FEATURES:

• Includes four corner Linear Super-LEDs
• Low profile design, only 2 1/4″ high by 12″ wide, reduces air drag and provides the popular stealth appearance to your vehicle.
• Ninety-five Scan-Lock™ flash patterns.
• Sturdy black polycarbonate base on an extruded aluminum platform will not bend.
• To access the lightbar for service or upgrade, simply remove four screws.

Guardian™ Series Lightbars



Rotating halogen and strobe 17″ lightbars with multi-color configuration using clear outer domes and color inner lenses. Permanent and magnetic mount versions.

FEATURES:

• Mounting options are permanent mount, magnetic mount and magnetic-suction mount.
• Attention getting 135 RPM rotators (G1 Series), or 175 RPM rotators (G2 Series)
• Brilliant diamond mirror provides a total of 540 FPM (G1 Series) or 700 FPM (G2 Series).
• Multi-color configuration with clear outer dome and color inner domes.

Responder® LP™ Series


Now a low profile,mini-lightbar that provides all the high performance LED warning and signalling benefits in a smaller size that fits all your special applications. Super-LED modules in a rugged polycarbonate or Aluminum base are built to take the roughest conditions and long hours you face. They’re road tested,vibration and moisture resistant and use much lower current than other warning lights. Put a Responder LP to work on your utility,security,fleet,construction or public works vehicle.


FEATURES:

• 100,000 hour rated life
• Built-in electronic flasher with 30 Scan-Lock™ flash patterns plus 4 simulated rotating patterns (permanent mount versions only)
• Permanent mount includes 6″ pigtail; magnetic mounts include 10′ straight cord with cigar plug with On/OFF and pattern control switch
• 6 Super-LED modules:choose from Conical (CON3™) modules(R1LP Series) or Linear-LED®modules (R2LP Series)
• Polycarbonate dome with smooth exterior will not gather dirt and dust.

Mini LFL Liberty™ Series



LFL Liberty is our newest, lowest profile lightbar that uses the next generation Super-LED™ technology in a compact state-of-the-art design. Featuring all Linear-LED™ reflector technology in a patent pending warning package that rivals strobes impact, but provides heavy-duty, long life operation with unbeatable low, low current draw.

FEATURES:

• High reliability features, needed to give you maximum heads up warning, in an extreme low profile lightbar that’s almost undetectable on the highways.
• All Linear-LED™ lightbar featuring the next generation of ultra bright, wltra wide-angle LED Technology.
• Optional halogen takedowns and alley lights

Whelen Justice Lightbar


High Performance and Cost Competitive

The Whelen Justice Competitor Series offers front, rear and all bar operation control, Scan-Lock™ flash patterns, pattern override feature, alley lights, take-downs, and low power operation. This lightbar uses standard CON3 lighthead modules with removable optic spreading filters and the corner modules have 6 Super-LEDs each. Comes with MR11 Take-Downs and Alley Lights.
This lightbar is very service oriented. To change colors, upgrade or service lightbar in the field, simply remove four screws to access any section of the lightbar. Replace any lighthead by removing one screw and single connector. Black polycarbonate base on an extruded aluminum platform. 50 inches long, 12 inches wide and only 2 1/4 inches high (without mounting feet). Clear outer lens standard with a moisture resistance compression fit gasket. Standard passenger side cable.

Features

Black polycarbonate base on extruded aluminum platform
Centre section available with single CON3 or two LTR3s (for split colour centre section)
Size: 50″ L x 12″ W x 2.25″ H.
All Linear-LED® lightbar featuring the next generation of ultra bright, ultra wide-angle LED technology.
Build your lightbar in any colour combination with take-downs and LED modules in any position you want.
Optional halogen take-downs and alley lights.
Optional five or six LED Traffic Advisor™ with ultra high intensity TIR6™ LED modules.
Low Power Operation.
Each group of four LED lightheads are driven by an all electronic module that provides proper input power and choice of flash patterns. You are assured of equal light intensity from each lighthead through a voltage range of 10-16 VDC.
ScanLock™ allows you to scan through ten flash patterns and lock in the desired pattern. Every pair of lights can have its own unique pattern.

FLASHBACK2 • DIGITAL IN-CAR VIDEO RECORDER


FEATURES:

• 100% Solid State – No Moving Parts and Maintenance Free!
• Superior MPEG-4 Compression (720×480 resolution)
• Totally Hands-Free Operation
• Pre-Event Recording – Up to 60 Seconds
• Specifically Designed for Digital-Mobile Applications
• Real Time Operating System
• GPS Module Included
• Compact Size 6.9″w x 6.1″d x 2.4″h
• Fits in Center Console
• USB Port for User Identification Key
• Records 2 Cameras and 3 Audio Sources Concurrently
• Recorded Metadata for Unparalleled Searchability (includes such data as GPS coordinates, GPS vehicle speed, RADAR patrol and target speeds, indicators for Emergency Lights, Siren, Brakes, Airbag Deployment)
• Digital Video Authentication Technology
• Secure Wireless File Transfer Using Wi-Fi (802.11g) and WEP encryption and WAP Protocals
• Wired File Transfer using 100Mbit ethernet connection
• Removable Compact Flash Media (currently available up to 8 Gigs or 16 hours, depending on quality level setting)
• Radar Interface
• Designed and Built From The Ground Up by Mobile-Vision for Law Enforcement
• Standard Equipment includes VoiceLink Plus (900Mhz wireless microphone) and Nite-Watch Camera (a high performance 144x zoom camera with enhanced nighttime operation)

Monitor Mounts


Swivel Monitor Mounts

• Designed for modular tablet and work station computers.
• Cam lever-locking arm allows precise swivel and tilt to any desired angle
• Adapt to all Havis-Shields hole patterns so they can be mated to any console or mount

Dash Monitor Mounts

• Fixed or Tilt/Swivel mount available
• Excellent space-saving solution for two officer patrols and FTOs
• Positions computer and monitor in safe, convenient line of sight
• AM/FM relocation mounting 

HANDHELD STATIONARY/MOVING DIRECTIONAL RADAR


Product Features:

• Moving Direction Sensing Technology
• Very High Performance Design
• Fastest Speed Tracking
• 3 Window Display
• Read-Thru Lock
• Backlit LCD for Nighttime Use
• Advanced Digital Signal Processing
• Cordless Operation Available
• Remote Control Option
• Detachable Handle Design
• Touch Panel Keyboard
• Narrow Beam-Width
• Rugged Die-Cast Metal Construction
• Moving & Stationary Versions
• 2-Year Full Warranty

Additional Product Information

•The new Stalker II handheld radar combines the range and performance of a car-mounted radar in a versatile, hand-held package. The Stalker II is available in either moving / stationary or stationary-only versions as well as with either a cordless battery handle or a corded handle.

• The Stalker II’s direction sensing and moving mode capabilities allow it to go from handheld to dash mount and back to handheld without missing a step.
Stalker II is waterproof. Its die-cast-metal case is smaller and lighter than most handhelds, and the Stalker II is waterproof to a depth of 2 feet.

• The 3-window backlit display presents an intuitive user interface with clear messaging and control buttons. It features LCD display windows for Strongest Target, Faster Target, and Patrol Speed (in moving mode) with direction arrows that indicate the direction of travel for both the strongest and faster targets. By displaying both strongest and faster targets simultaneously, the Stalker II can monitor faster vehicles passing larger vehicles and display the speed of both targets simultaneously.

• The detachable handle system Stalker II detachable handle system allows the operator to swap battery handles in seconds.

• The battery handle charger operates using either the 120 VAC wall adapter or an optional 12 VDC cigarette plug cable.

Beta Sirens • HANDS FREE 100 WATT ELECTRONIC SIREN WITH RADIO REPEAT AND PA



Beta Sirens meet budget sensitive demands for low-cost, 100 watt siren warning performance, public address, radio repeat capability and HANDS-FREE operation. Extremely versatile, Beta Sirens allow easy set-up and configuration to meet local requirements without special ordering.

• HANDS-FREE operation. Cycle through two or three siren tones without taking your hands from the steering wheel.
• Flexibility. BETA112R remote amplifier works with the BETA1 and BETA2 Control Heads (sold separately) or customer supplied switches or slide switch control systems.
• Five siren tones available. Use up to four tones: Wail, Yelp, Piercer or High-Low and Air Horn.
• Public Address and Radio Repeat, standard.
• PA over-ride in all functions.
• 100 Watt Output.
• Meets Class A requirements with most 100 watt siren speakers.
• Easy to install. Pre-wired with quick disconnect plugs for easy service and fast replacement.
• Conveniently accessible dip switches on remote amplifier allows instant configuration of popular operating features.
• BETA1 Control Head is pre-drilled for under dash mounting and includes noise cancelling microphone.
• BETA2 Control Head may be used for surface and recessed mounting applications. For flush installation, a mounting bracket with integral flange is optional.
• Moisture resistant BETA2 Control Head is fully encapsulated, features sealed toggle and rotary switches and includes a removable noise canceling microphone.
• 24 month warranty.


MODELS:

BETA112R:

Remote amplifier only.

BETA1:

Control head with noise canceling microphone and 15’ cable.

BETA2:

Control head with noise canceling microphone and 20’ cable.

BETA2BKT:

Mounting bracket with flange for console or recessed mounting for BETA2 Control head. Bracket furnished in black.

BETAMIC:

Remote Microphone for use with Beta112R (using customer supplied switches).